N S K E L E C T R O N I C S

Search

Go to content

Main menu:


EM-18 RFID READER

RFID - MIFARE

For More Updates Visit our New Website www.nskelectronics.in


This module directly connects to any microcontroller UART or through a RS232 converter to PC.It gives UART/Wiegand26 output. This RFID Reader Module works with any 125 KHz RFID tags

Specifications

  • 5VDC through USB (External 5V supply will boost range of the module)
  • Current: <50mA
  • Operating Frequency: 125Khz
  • Read Distance: 10cm
  • Size of RFID reader module: 32mm(length) * 32mm(width) * 8mm(height)



2. RS232 interface format:

10 ASCII DATA (card no.)+ 2 ASCII DATA (XOR result)

E.g. Card number is 4500C5D1E9B8 read from reader then the card number on card will be as below.

45 - Preamble


00C5D1E9 value in Hex = 12964329. / B8 is XOR value for (45 XOR 00 XOR C5 XOR D1 XOR E9)

Hence number on the card is 0012964329.
1. Data baud rate: 9600 bps
2. Data bit 8 bits
3. Parity check: None
4. Stop bit

Home Page | NSK PRODUCTS | INDUSTRIAL AUTOMATION & PLC | MINI PROJECTS >>> | 8051 | PIC | AVR | Arduino | ARM 32 Bit | RENESAS | MSP 430 | ARM CORTEX M3 | VLSI - CPLD KITS | UNIVERSAL PROGRAMMERS | Audio&Voice Recognition | GSM & GPRS - GPS | RFID - MIFARE | Wired Communication | Wireless Communication | SENSORS | INTERFACE BRDS | Power Supplies | MOTOR DRIVES | MOTORS | ROBOTICS | PCB - Prototyping | BUY COMPONENTS/TOOLS | ELECTRONIC COMPONENTS | CONTACT US | How To Place Order? | NSK SUPPORT | Site Map

Search

Back to content | Back to main menu