• 8051 Programmer for ATMEL 8051 Architecture
• Communication Through RS 232
• Supports Major 8051 Chips - 89C51,89C52,89C55wd,89S51,52,53,89s8252
• For USB Connectivity Use USB to UART Converter

• 8051 Programmer for ATMEL 8051 Architecture
• Communication Through LPT Parallel Port
• Supports Major 8051 Chips - 89C51,89C52,89C55wd,89S51,52,53,89s8252,89C51RC,89C1051,2051,4051

• Microchipc PIC series Programmer
• Communication Through RS 232
• Supports Major PIC Chips - 12CXX,12FXX,16CXX,16FXX,16FXXX,18FXXX

• Microchipc PIC series Programmer
• Communication Through USB PORT
• Supports Major PIC Chips - 12CXX,12FXX,16CXX,16FXX,16FXXX,18FXXX

• Microchipc PIC series Programmer / Debugger From MPLAB
• Communication Through RS232 Serial PORT
• Supports Major PIC Chips - 12CXX,12FXX,16CXX,16FXX,16FXXX,18FXXX

• AVR Programmer For Atmel AVR series
• Communication Through USB Port
• Connecting Through AVR STUDIO- Avr Prog - Protocal : Avr Prog, Avr 911,910
• Supports Major AVR Chips -AT90S,ATMEGA,ATTINY Series

• 8051 Architecture Philips Series 64k Flash
• Communication Through RS 232
• Supports Major Chips from Philips
• Pre Programmed Boot Loader
• Flash Magic Software For Downloading hex File

• EEprom (i2c) Programmer - Self Powered
• Communication Through RS 232
• Supports Major 12c & 93c

• LPC 2129 Single-chip 16/32-bit microcontrollers
• 128/256 KB ISP/IAP Flash
• 4 Channel 10-bit ADC , 2 CAN Ports with Transrecivers
• 8 LED Array, 4 x 7-Segment LED Display - Multiplexed , 4 Test Buttons
• LCD Display , 4x4 Matrix Key Board , Buzzer, I2C 24C Eeprom , 2 UARTs
• RS232 Serial Port FOR ISP PROGRAMMING
• Parallel Port for On board JTAG Wigglerr

• The CPLD Development kit based on Xilinx XC9572XL is a
• low cost evaluation platform for training, testing and developing designs
• Xilinx 9500XL family of CPLD.( 1600 gates)

• On Board Regulated Power Supply
• Optional 5v and 12v Dc O/P
• Compatible for 8051 Architecture
• 8 LED Array
• INPUTS - 4 INT Swtiches,Matrix Keypad,
• OUTPUTS - 7 Seg Display,LCD display,ULN 2003
• RTC 1302 , ADC 080 , i2c 24C02 ,RS232 Port
• Burg Connecters for Wiring
• CD Contains Example Programs For All Applications
• 40 Pin Zip Socket for 40 Pin Controllers
• Use Adapter for 20 Pin Micro( AT 89c2051)

• On Board Regulated Power Supply
• Optional 5v and 12v Dc O/P
• Compatible for PIC 40 pin ( Adapters for 28,18,8,pin Extra )
• 8 LED Array
• INPUTS - 4 INT Swtiches,Matrix Keypad,
• OUTPUTS - 7 Seg Display,LCD display,ULN 2003
• RTC 1302 , ADC 080 , i2c 24C02 ,RS232 Port
• Burg Connecters for Wiring
• CD Contains Example Programs For All Applications
• RJ 11 Socket for ICSP Programming Through Pic Prog,Pic Plus,Pic ICD2
• 40 Pin Zip Socket for 40 Pin Chips , For 28,18,8, Pins use Adapters

• • Dimensions: 135x169mm (carrier board), 58x36mm (kernel board)
  • Working temperature: -20~70 Celsius
  • Power supply: +12V
  • Samsung S3C2410A (ARM920T core with MMU capable of 266+ MHz operation)
  • 64Mbyte Nand Flash, 64Mbyte SDRAM
  • 1 LCD interface (STN or TFT, support resolution up to 1024x768)
  • 1 10M Ethernet interface
  • 3 serial ports (can be extended to 485 interface)
  • 1 USB host and 1 USB device
  • Audio Input/Output
  • RTC (battery backed)
  • 1 20pin (2.0mm space) standard JTAG interface
  • SD / MMC card interface
  • 4 Status LEDs, • 4 Test buttons, • 1 Power switch, • 1 Reset button
  • 1 20pin standard JTAG interface, • IDE44 port: for 2.5" hard disk
  • System interfaces:, SPI x 1, I2C x 1, I2S x ,,AD x 2 (10 bit precision)
  PWM x 1, External interrupt
• LINUX LOADED

The ALL-11 supports programming just about every type of device with a programmable memory or configuration including EPROM, EEPROM,FLASH, MPU/MCU/DSP, PLD/CPLD/FPGA, Micro controller, BPROM, SPROM, NV RAM, and much more. Pin driver circuits provide extremely accurate programming waveforms, high-speed high reliability and a compact form factor.

It can process all popular file formats including Intel Hex, Motorola S-records, Binary, JEDEC fuse map (JED), Altera POF, and others.

A high speed serial port interface (up to 115K baud) Connects the programmer to any desktop or Lap top PC running Windows 95 or higher.

A full screen editor is provided to view or edit any address of the programming buffer in binary, ASCII or Logic fuse map formats.

FOR USB INTERFACE USE USB TO UART ADAPTER

DOWNLOAD DEVICE SUPPORT LIST